Posts

Showing posts from 2010

Planning Manali Tour

Image
I am Planning Manali Tour in december end... One can easily hire the bike/ bullet on daily hiring basis upto rs.500 a day with ur fuel cost... Here is my tentative plan :


Day 1:
city tour visiting Hadimba Devi Temple, Manu Temple, Tibetan Monastery and Vashisht Village.


Day2:
Going to Manali - Leh Highway towards rohtang to see Kothi Gorge, Gulaba, Marhi, Rohtang Pass or Upto Snow Line in case Rohtang is closed due to snow fall.


If you have more time and Manali - Leh highway is open then you can go up to Keylong 120 km after crossing the Rohtang Pass.


Day3:
Paragliding:located at Solang Valley. There are multiple levels, starting from the basic 1 minute flying for Rs. 450 (the most common), progressing to a more fun 5 minute flight for Rs. 1500. But the ultimate is the half an hour flight for Rs. 2500, for which they take you up almost halfway to rohtang, and bring you back to solang all the way by paragliding.Solang Nala is located near the Kullu Valley and has vast snow fields and slopes t…

How to start programming for mobile devices symbian OS

Image
1. Join the nokia forum  http://www.forum.nokia.com

2. ActiveState ActivePerl 5.6.1 Build 635 is required by the S60 and Symbian SDKs to enable C++ development. Download and install prior to installing the required SDKs. The version of ActivePerl required for these SDK is available here.
By default it wont get installed on c:\ but installed from where the setup runs (eg g:\)when installing on windows 7 right click on its setup exe and unblock to set environment variable. do this right click on "my computer"----> properties-->advanced system settings ----> environment variables.
then enter new system variable with name "PATH"
and value: enter the path for perl/bin folder


when i start the carbide, it pops up an alert message,telling that "perl was not found on your PATH.the symbian building tools cannot work successfully without perl.".
I resolved the problem.
initially i had my path variable like this (a space after semicolon)
C:\Program Files\CSL …

How to change LAN IP domain from one to another

Image
I have a Local area network with 191.254.186.0 domain. It is connected to MPLS (172.29.176.229) as well as VSAT backup link (191.254.125.133) with serial 0 ports of CISCO 2800 router. For some reasons I have to change my network to 10.0.220.0 domain.






Changing LAN  from 191.254.186.0/24 to 10.0.220.0/24>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
1. change router ethernet interface ip in this case it will become 10.0.220.17 from 191.254.186.17. Go to start > Run > type cmd telnet 10.0.220.17 enter password uttarkashi#config uttarkashi(config)#interface GigabitEthernet0/0 uttarkashi(config)#description $Loahari-LAN$$INTF-INFO-GE 0/0$ uttarkashi(config)#ip address 10.0.220.17 255.255.255.0 uttarkashi(config)#Ctrl-Z 2. Now change IP of your PC to 10.0.220.6 3. Now router can access the external networks but your PC dosen’t so now configure bgp so that all…

How to give internet access to certain IP in LAN using ISA web proxy

Image
Ok so you have a local area network of computers and you want to give internet access to only few computers. First configure your ISA server as i explained earlier in my post http://vinodkotiya.blogspot.com/2010/08/how-to-install-isa-internet-proxy.html


Now >>> open isa management
>>> go to firewall policy ( as marked 1 in red color in first image ) >>> policy u view there local internet rule >>> in internet rule  ( as marked 2 in red color )
>>> open property of internet rule  ( as marked 3 in red color )
>>> go to from tab 
>>> u have to remove internal from there ( as marked 4,5 in red color )
>>> don't forgot to remove internal from internet rule >>> because internal allow all pc >>> & add new computer by giving ip >>> so that only certain ip will be allowed from the internal range add-> computers  ( as marked 1 in red color of image 2 )
>>> to add certain ip click on add ( as m…

Trans Himalaya Trek

Image
Trans Himalaya Trek:


I have little information about Trans Himalaya Trek. It is a 2500 km trek which starts from nepal and ends at Leh. Best time to start the trekking is March - april and it takes 6 month to complete it. I have not done the Trans Himalaya Trek but i have been at the places which comes in to Trans Himalaya Trek. It's now 5th year for me living in himalayas. I will share some snaps of trans himalaya places in this blog.


The route traverses the entire Western Himalaya, starting at Dharchula on the western border of Nepal, it enters in to india from uttarakhand  cuts through the dense knot of the Nanda Devi and then covers the kedarnath badrinath  Gangotri group of mountains, further it goes to kinnaur valley of himachal from Harsil valley of uttarakhand, then crosses into the valleys of Spiti , Lahaul and eventually ends at Kargil in Leh.


Very few people have walked the length of the Himalayas in the last few decades. Either that or there is just very little documented…

How to install ISA internet proxy

Image
Internet Service Accelerator for web proxy
>>> restart the pc & after that open isa management console  >>> from program menu >>> go to firewall policy >>> now right click on that & go to new policy >>> then access rule >>> it will open a wizard  >>> write internet rule >>> click on next >>> choose allow >>> click next >>> select all outbound protocols >>> then next >>> now click on add >>> go to network >>> double click on internal & than local host >>> has it is showing internal & local host in the list >>> click on next >>> now again add >>> & choose external from networks  >>> now finish  >>> bye clicking next next >>> i think one rule has been made in the list >>> now again make one more access rule >>> this is for ur local network >>> name it local >>> al…

Google+ Followers